Chuck &Accessory Prices
Home - Millhill Supplies - Sherline
Accessories used with the mill are shown with the part number in blue
Accessories used with the lathe are shown with the part number in red
Accessories used with non-Sherline machines are shown with the part number in green
Accessories that can be used with either the lathe or mill are shown with the part number in white
|
|
SHERLINE CHUCKS | ||
| PART NO. | PRODUCT NAME AND USE | WT / LBS | PRICE £ |
| 1010 | 0JT 5/32" Jacobs drill chuck w/ #1 Morse arbor (headstock), drawbolt and key | 0.5 | 67.50 |
| 1012 | Sensitive drilling attachment (See Accessories section following chuck section) | 2 | 106.00 |
| 1015 | 0JT 5/32" Jacobs drill chuck w/ #0 Morse (tailstock) arbor and key | 0.5 | 67.50 |
| 1030 | 4-Jaw Chuck (3.125" O.D.) | 2 | 130.00 |
| 1031** | 14 x 1 mm 3-jaw chuck (2.5" O.D.) | 2 | 115.50 |
| 1035** | 14 x 1 mm 4-jaw chuck (2.5" O.D.) | 2 | 115.50 |
| 1040 | 3-Jaw Chuck (3.125" O.D.) | 2 | 125.00 |
| 1041 | 3-Jaw Chuck (2.5" O.D.) | 2 | 96.00 |
| 1044 | 4-Jaw Chuck (2.5" O.D.) | 2 | 106.00 |
| 1068* | 12 x 1 mm 3-jaw chuck (2.5" O.D.) w/ reversible jaws | 2 | 115.50 |
| 1069 | 3/8" Jacobs Tailstock Drill Chuck w/ #0 and #1 Morse arbors, drawbolt and key | 1.5 | 62.50 |
| 1070*** | 1/2-20 3-Jaw (2.5" O.D.) | 2 | 115.50 |
| 1071* | 12 x 1 mm 4-jaw chuck (2.5" O.D.) | 2 | 115.50 |
| 1072 | 1/4" Jacobs tailstock drill chuck w/ #0 and #1 Morse arbors, drawbolt and key | 0.5 | 53.00 |
| 1073*** | 12-20 4-Jaw Chuck (2.5" O.D.) | 2 | 115.50 |
| 1075 | Self-centering 4-Jaw Chuck (2.5" O.D.) | 2 | 125.00 |
| 1076 | Self-centering 4-Jaw Chuck (3.125" O.D.) | 2 | 158.50 |
| 3072 | 1/4" Jacobs Drill Chuck w/ #1 Morse arbor, drawbolt and key (#0 Morse arbor not incl. See P/N 1072 if you need both arbors) | 0.5 | 48.00 |
| 3073 | 3/8" Jacobs Drill Chuck w/ #1 Morse arbor, drawbolt and key (#0 Morse arbor not incl. See P/N 1069 if you need both arbors) | 0.75 | 58.00 |
| *12 x1 mm threads for use on Unimat SL 1000 | |||
| **1/2-20 threads for use on old Sears 6" lathe | |||
| ***14 x 1 mm threads for use on Unimat 3 or Cowells lathes | |||
|
|
|||
| SHERLINE ACCESSORIES | |||
| PART NO. | PRODUCT NAME AND USE | WT / LBS | PRICE £ |
| 1012 | SENSITIVE DRILLING ATTACHMENT (Threads onto mill spindle. Spring loaded 5/32" chuck is pulled down by hand using a bearing supported knurled collar. Provides quick action and great "feel" when drilling small holes.) | 2 | 106.00 |
| 1074 | STEADY REST (Supports the end of long work for center drilling) | 0.75 | 38.50 |
| 1090 | FOLLOWER REST (Supports thin work, keeps it from deflecting away from the cutter, moves with the lathe saddle to "follow" the work) | 0.75 | 67.50 |
| 1160 | WW COLLET SET (Metric P/N 1178) (P/N 1161 included in set) (Collets are like small, individually sized chucks for holding a specific diameter tool or material. WW collets have a hole through the collet and drawbar to accept long material. Traditionally used by watch and clock makers. Sherline WW collets have a .312-.313 body size and .275-40 thread.) | 0.5 | 86.50 |
| 116000 + size | WW COLLET, CUSTOM SIZE (Custom size collets can be ordered in sizes from .050" to .320" or 1.28 mm to 8.13 mm. For example, a custom collet might be ordered as 116000 .100" or 116000 2.75 mm.) Custom collets are not laser engraved with size information. Allow 3 weeks for delivery. | 0.05 | 38.50 |
| 116000 | WW COLLET BLANK, Large Head | 0.05 | 10.50 |
| 1160001 | WW COLLET BLANK, Small Head | 0.05 | 10.50 |
| 116001 | 1/64" WW COLLET | 0.05 | 38.50 |
| 116002 | 1/32" WW COLLET | 0.05 | 30.50 |
| 116003 | 3/64" WW COLLET | 0.05 | 20.00 |
| 116004 through 116020 | WW COLLETS from size 1/16" to 5/16" by 64ths. The part number is given as 1160__ plus the number of 64ths to denote size. For example, 13/64" is P/N 116013 and a 1/4" collet (16/64") is P/N 116016. | 0.05 | 16.40 |
| 1161 | WW COLLET ADAPTER & DRAWBAR (Included in collet set. Adapts WW taper to #1 Morse taper of Headstock) | 0.5 | 48.00 |
| 1162 | DELUXE WW COLLET SET (Inch) (17 collets, adapter, drawbar, pot chucks, knockout bar, etc. in wooden case) | 3 | 265.00 |
| 1163 | 8.0 MM COLLET ADAPTER & DRAWBAR (WW collets vary somewhat depending on manufacturer. This adapter holds those with a .314-.315 body size) | 0.5 | 53.00 |
| 1164 | WW COLLET FIXTURE (Allows WW collets with .312-.313 body to be held on face of rotary table or mill table.) | 1 | 101.00 |
| 1165 | 8.0 MM COLLET FIXTURE (Allows WW collets with .314-.315 body to be held on face of rotary table or mill table.) | 1 | 110.50 |
| 1170 | OAK WW COLLET STORAGE BOX (A high quality storage box that holds up to 22 WW collets plus collet pot chucks, drawbar, knockout bar and WW collet adapter. Beveled corners, brass hardware, satin lacquer finish.) | 1 | 24.00 |
| 1171 | OAK WW COLLET STORAGE BOX (A high quality storage box that holds up to 96 WW collets. Beveled corners, brass hardware, oak insert with 96 holes, satin lacquer finish.) | 1 | 31.00 |
| 117803 | .3 mm WW COLLET | 0.05 | 38.50 |
| 117804 | .4 mm WW COLLET | 0.05 | 38.50 |
| 117805 through 117808 | WW COLLETS from size .5mm through .8 mm by .1 mm increments. The Part number is given as 11780 plus the collet size in .1 mm. For example, a .6 mm collet would be P/N 117806 | 0.05 | 38.50 |
| 117809 through 117814 | WW COLLETS from size .9mm through 1.4 mm by .1 mm increments. The part number is given as 11780_ or 1178__ plus the collet size in .1 mm. For example, a 1.1 mm collet would be P/N 117811. | 0.05 | 30.75 |
| 117815 through 117880 | WW COLLETS from size 1.5 mm through 8.0 mm by .1 mm increments. The part number is given as 1178__ plus the collet size in .1 mm. For example, a 6.4 mm collet would be P/N 117864. | 0.05 | 16.40 |
| 1179 | DELUXE WW COLLET SET (Metric) (14 collets, pot chucks, etc. in wooden case. P/N 1161 included in set) | 3 | 235.00 |
| 1180 | COMPLETE METRIC WW COLLET SET with 78 collets sized from .3 mm to 8.0 mm by .1 mm increments plus a blank collet. The set is contained in a P/N 1171 oak collet box with 96-hole oak insert. | 4 | 898.00 |
| 1182 | BULLNOSE LIVE CENTER (Supports tubing or stock with a large end hole when turning between centers. Dual preloaded bearings.) | 0.75 | 77.00 |
| 1185 | VERTICAL MILLING TABLE (Metric P/N 1184) (Mounts to lathe or mill table to move work up and down. Has 2.25" of vertical travel and 8" long table.) (Metric P/N 1184) | 2.5 | 115.50 |
| 1187 | CHUCK-TO-T-SLOT ADAPTER (Allows 3- or 4-jaw chuck to be quickly screwed to mill table.) | 0.06 | 7.25 |
| 1191 | LIVE CENTER (Ball bearings allow center to rotate with part to reduce friction when turning between centers) | 0.25 | 38.50 |
| 1201 | ADJUSTABLE LIVE CENTER (Ball bearing live center adjusts for perfect centering of headstock and tailstock) | 0.5 | 62.50 |
| 1202 | ADJUST. TAILSTOCK CHUCK ARBOR (Allows perfect centering of tailstock chuck in relation to headstock) | 0.5 | 43.50 |
| 1203 | ADJUST. TAILSTOCK TOOL HOLDER (Allows perfect centering of round tools held in tailstock) | 0.5 | 43.50 |
| 1206 | ADJUST. TAILSTOCK 1" DIE HOLDER w/ 13/16" bushing (Allows perfect centering of 1" or 13/16" threading dies) | 0.5 | 58.00 |
| 1220 | TAILSTOCK SPINDLE EXTENDER (Designed for lathes built before July, 1996 to extend reach of tailstock spindle over table. Not needed on newer lathes) | 0.5 | 38.50 |
| 1230 | #0 MORSE ARBOR TO 3/4-16 CHUCK THREAD ADAPTER (Allows a 3- or 4-jaw chuck to be mounted on the tailstock spindle) | 0.5 | 38.50 |
| 1270 | COMPOUND SLIDE (Redesigned, Replaces P/N 1080) (metric P/N 1280) (An alternate and more traditional way of turning tapers) | 1 | 120.50 |
| 1272 | COMPOUND SLIDE RISER BLOCK (Raises compound slide about 1" for use on front side of crosslide with riser blocks in place on lathe) | 0.5 | |