Download PDF version

Full Catalogue

This page contains a full price list of all Sherline products and accessories that we sell.

There are also smaller lists for just lathes, mills and accessories:

Contents

LATHES

Part Number Part Weight Cost
4000
4100 (metric)
Sherline 3.5″ x 8″ lathe with high torque DC motor and speed control10.91kg
24lbs
£570
4000-CNC
4100-CNC (metric)
Model 4000 lathe equipped with stepper motor mountsEquipped with stepper motor mounts ready for you to convert to computer numeric control (CNC). Stepper motors, software, drivers and computer NOT included.12.27kg
27lbs
£811.5
4000-DRO
4100-DRO (metric)
Model 4000 lathe with P/N 8200 2-axis digital readout/RPM display factory installed12.27kg
27lbs
£910
4400
4410 (metric)
Sherline 3.5″ x 17″ long bed lathe w/ adjustable zero handwheels and rocker tool post13.64kg
30lbs
£665
4400-CNC
4410-CNC (metric)
Model 4400 lathe equipped with stepper motor mountsModel 4400 lathe equipped with stepper motor mounts ready for you to convert to computer numeric control (CNC). Stepper motors, software, drivers and computer NOT included.15kg
33lbs
£892
4400-DRO
4410-DRO (metric)
Model 4400 lathe with P/N 8200 2-axis digital readout/RPM display factory installed15kg
33lbs
£945
4500
4530 (metric)
Model 4000 lathe w/ adjustable zero handwheels10.91kg
24lbs
£625
4500-CNC
4530-CNC (metric)
Model 4500 lathe equipped with stepper motor mounts (CNC)Model 4500 lathe equipped with stepper motor mounts ready for you to convert to computer numeric control (CNC) Stepper motors, software, drivers and computer NOT included.not known£CALL

LATHE PACKAGES

Part Number Part Weight Cost
4000A
4100A (metric)
Model 4000 lathe PLUS 1041 3-jaw chuckModel 4000 3.5″ x 8″ lathe PLUS 1041 2.5″ 3-jaw chuck and 1072 1/4″ drill chuck (Metric P/N 4100A)11.36kg
25lbs
£665
4000A-CNC
4100A-CNC (metric)
4000/4100A lathe package with CNC stepper motor mounts (CNC-ready)4000/4100A lathe package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls. Purchased from aftermarket supplier.12.73kg
28lbs
£924
4000A-DRO
4100A-DRO (metric)
4000/4100A lathe package with digital readouts factory installed12.73kg
28lbs
£975
4000B
4100B (metric)
4000A (4100A) lathe package PLUS 1074 steady rest4000A (4100A) lathe package (see above) PLUS 1074 steady rest, 1191 live center, 3002 cutoff tool and holder, 3007 1/4″ HSS tool set, 3020 Sherline T-driver, 3021 center drill set and 5327 Sherline Shop Guide book. (Metric P/N 4100B) (2 boxes)14.09kg
31lbs
£835
4000B-CNC
4100B-CNC (metric)
4000/4100B lathe package with CNC stepper motor mounts (CNC-Ready)4000/4100B lathe package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls. Purchased from aftermarket supplier.15.45kg
34lbs
£1,095.00
4000B-DRO
4100B-DRO (metric)
4000/4100B lathe package with digital readouts factory installed15.45kg
34lbs
£1,140.00
4000C
4100C (metric)
4000B (4100B) lathe package above PLUS 1270 compound slide4000B (4100B) lathe package above PLUS 1270 compound slide and 3100 thread cutting attachment. (2 boxes)15.45kg
34lbs
£1,060.00
4000C-CNC
4100C-CNC (metric)
4000/4100C lathe package with CNC stepper motor mounts (CNC-Ready)4000/4100C lathe package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls. Purchased from aftermarket supplier.16.82kg
37lbs
£1,336.00
4000C-DRO
4100C-DRO (metric)
4000/4100C lathe package with digital readouts factory installed16.82kg
37lbs
£1,370.00
4400A
4410A (metric)
Sherline Model 4400 lathe w/ 1040 3/1″ 3-jaw chuckSherline Model 4400 3.5″ x 17″ lathe w/ 1040 3/1″ 3-jaw chuck and 1069 3/8″ drill chuck (2 boxes)15kg
33lbs
£785
4400A-CNC
4410A-CNC (metric)
4400/4410A lathe package with CNC stepper motor mounts (CNC-Ready)4400/4410A lathe package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls (purchased from aftermarket supplier)16.36kg
36lbs
£1,020.00
4400A-DRO
4410A-DRO (metric)
4400/4410A lathe package with digital readouts factory installed16.36kg
36lbs
£1,065.00
4400B
4410B (metric)
Sherline model 4400A lathe package above PLUS 1074 steady restSherline model 4400A lathe package above PLUS 1074 steady rest, 1191 live center, 3002 cutoff tool, 3007 1/4″ HSS tool set, 3020 Sherline T-driver, 3021 center drill set and 5327 Sherline Shop Guide book. (2 boxes)16.36kg
36lbs
£955
4400B-CNC
4410B-CNC (metric)
4400/4410B lathe package with CNC stepper motor mounts (CNC-Ready)4400/4410B lathe package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls (purchased from aftermarket supplier)17.73kg
39lbs
£1,202.00
4400B-DRO
4410B-DRO (metric)
4400/4410B lathe package with digital readouts factory installed17.73kg
39lbs
£1,240.00
4400C
4410C (metric)
Sherline model 4400B lathe package above PLUS 1270 compound slideSherline model 4400B lathe package above PLUS 1270 compound slide and 3100 thread-cutting attachment. (2 boxes)18.64kg
41lbs
£1,185.00
4400C-CNC
4410C-CNC (metric)
4400/4410C lathe package with CNC stepper motor mounts (CNC-Ready)4400/4410C lathe package 6000/6010 Ultimate Machine Shop package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls (purchased separately from Sherline or an aftermarket supplier)20kg
44lbs
£1,448.00
4400C-DRO
4410C-DRO (metric)
4400/4410C lathe package with digital readouts factory installed20kg
44lbs
£1,465.00
4500A
4530A (metric)
Model 4500 lathe package with adjustable “zero” handwheelsModel 4500 3.5″ x 8″ lathe with adjustable “zero” handwheels PLUS 1041 2.5″ 3-jaw chuck and 1072 1/4″ drill chuck11.36kg
25lbs
£715
4500B
4530B (metric)
4500A (4530A) lathe package (see above) PLUS 1074 steady rest4500A (4530A) lathe package (see above) PLUS 1074 steady rest, 1191 live center, 3002 cutoff tool and holder, 3007 1/4″ HSS tool set, 3020 Sherline T-driver, 3021 center drill set and 5327 Sherline Shop Guide book14.09kg
31lbs
£880
4500C
4530C (metric)
4500B (4530B) lathe package above PLUS 1270 compound slide and 3100 thread cutting attachment15.45kg
34lbs
£1,115.00

VERTICAL MILLING MACHINES

Part Number Part Weight Cost
2000
2010 (metric)
Sherline 8-direction vertical milling machineSherline 8-direction vertical milling machine w/ 14″ base, w/ adjustable zero handwheels and P/N 3072 1/4″ drill chuck.20.45kg
45lbs
£970
2000-CNC
2010-CNC (metric)
Model 2000 mill equipped with stepper motor mounts (CNC)Model 2000 mill equipped with stepper motor mounts ready for you to convert to computer numeric control (CNC) Stepper motors, software, drivers and computer NOT included.21.82kg
48lbs
£1,272.00
2000-DRO
2010-DRO (metric)
8-direction vertical milling machine above with digital readout/RPM display factory installed21.82kg
48lbs
£1,300.00
5000
5100 (metric)
Sherline vertical milling machine w/ 10″ base16.36kg
36lbs
£645
5000-CNC
5100-CNC (metric)
Model 5000 mill equipped with stepper motor mounts (CNC)Model 5000 mill equipped with stepper motor mounts ready for you to convert to computer numeric control (CNC) Stepper motors, software, drivers and computer NOT included.17.73kg
39lbs
£918.5
5000-DRO
5100-DRO (metric)
Model 5000 mill w/ digital readout/RPM display factory installed17.73kg
39lbs
£1,000.00
5400
5410 (metric)
Deluxe mill packageVertical Mill w/ 12″ base, adjustable zero handwheels, headstock spacer block (1297), 1/4″ drill chuck (3072), laser engraved scales on base and table.17.27kg
38lbs
£760
5400-CNC
5410-CNC (metric)
Model 5400 mill equipped with stepper motor mounts (CNC)Model 5400 mill equipped with stepper motor mounts ready for you to convert to computer numeric control (CNC) Stepper motors, software, drivers and computer NOT included.18.64kg
41lbs
£1,048.00
5400-DRO
5410-DRO (metric)
Model 5400 deluxe mill package w/ digital readout/RPM display factory installed18.64kg
41lbs
£1,090.00

MILL PACKAGES

Part Number Part Weight Cost
2000A
2010A (metric)
Deluxe mill package. Sherline model 2000 8-direction mill PLUS 3013 step block hold-down set.(See 5000A or 5400A package above for accessory items) Sherline model 2000 8-direction mill PLUS 3013 step block hold-down set, 3020 T-driver, 3021 center drill set, 3052 fly cutter, 3060 mill collet set, 3072 1/4″ drill chuck, 3079 3/8″ end mill holder, 7400 6-pc. Double ended 3/8″ end mill set, 3551 mill vise and 5327 […]23.64kg
52lbs
£1,205.00
2000A-CNC
2010A-CNC (metric)
2000/2010A mill package with CNC stepper motor mounts2000/2010A mill package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls (purchased separately from Sherline or an aftermarket supplier)25kg
55lbs
£1,518.00
2000A-DRO
2010A-DRO (metric)
2000/2010A mill package with digital readouts factory installed25kg
55lbs
£1,530.00
5000A
5100-A (metric)
5000 (5100) milling machine PLUS 3013 step block hold-down set (mill package)5000 (5100) milling machine PLUS 3013 step block hold-down set, 3020 T-driver, 3021 center drill set, 3052 fly cutter, 3060 mill collet set, 3072 1/4″ drill chuck, 3079 3/8″ end mill holder, 7400 6 Pc. 2-flute double ended end mill set, 3551 mill vise and 5327 Sherline Shop Guide book (2 boxes)20kg
44lbs
£930
5000A-CNC
5100A-CNC (metric)
5000/5100A mill package with CNC stepper motor mounts5000/5100A mill package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls (purchased separately from Sherline or an aftermarket supplier)21.36kg
47lbs
£1,223.00
5000A-DRO
5100A-DRO (metric)
5000/5100A mill package with digital readouts factory installed21.36kg
47lbs
£1,285.00
5400A
5410A (metric)
Deluxe mill package. Sherline model 5400 deluxe mill PLUS 3013 step block hold-down setSherline model 5400 deluxe mill PLUS 3013 step block hold-down set, 3020 T-driver, 3021 center drill set, 3052 fly cutter, 3060 mill collet set, 3072 1/4″ drill chuck, 3079 3/8″ end mill holder, 7400 6-pc. Double ended 3/8″ end mill set, 3551 mill vise and 5327 Sherline Shop Guide book (2 boxes)21.82kg
48lbs
£995
5400A-CNC
5410A-CNC (metric)
5400/5410A mill package with CNC stepper motor mounts5400/5410A mill package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls (purchased separately from Sherline or an aftermarket supplier)21.82kg
48lbs
£1,298.00
5400A-DRO
5410A-DRO (metric)
5400/5410A mill package with digital readouts factory installed21.82kg
48lbs
£1,320.00

SHERLINE ACCESSORIES

Part Number Part Weight Cost
1012SENSITIVE DRILLING ATTACHMENTThreads onto mill spindle. Spring loaded 5/32" chuck is pulled down by hand using a bearing supported knurled collar. Provides quick action and great "feel" when drilling small holes.0.91kg
2lbs
£106.00
1074STEADY RESTSupports the end of long work for center drilling0.34kg
0.75lbs
£38.50
1090FOLLOWER RESTSupports thin work, keeps it from deflecting away from the cutter, moves with the lathe saddle to "follow" the work0.34kg
0.75lbs
£67.50
1160
1178 (metric)
WW COLLET SETP/N 1161 included in set. Collets are like small, individually sized chucks for holding a specific diameter tool or material. WW collets have a hole through the collet and drawbar to accept long material. Traditionally used by watch and clock makers. Sherline WW collets have a .312-.313 body size and .275-40 thread.0.23kg
0.5lbs
£86.50
116000WW COLLET BLANK, Large Head0.02kg
0.05lbs
£10.50
116000+size WW COLLET, CUSTOM SIZECustom size collets can be ordered in sizes from .050" to .320" or 1.28 mm to 8.13 mm. For example, a custom collet might be ordered as 116000 .100" or 116000 2.75 mm.) Custom collets are not laser engraved with size information. Allow 3 weeks for delivery.0.02kg
0.05lbs
£38.50
1160001WW COLLET BLANK, Small Head0.02kg
0.05lbs
£10.50
1160011/64″ WW COLLET0.02kg
0.05lbs
£38.50
1160021/32″ WW COLLET0.02kg
0.05lbs
£30.50
1160033/64″ WW COLLET0.02kg
0.05lbs
£20.00
116004 - 116020 WW COLLETS from size 1/16″ to 5/16″ by 64ths.The part number is given as 1160__ plus the number of 64ths to denote size. For example, 13/64" is P/N 116013 and a 1/4" collet (16/64") is P/N 116016.0.02kg
0.05lbs
£16.40
1161WW COLLET ADAPTER & DRAWBARIncluded in collet set. Adapts WW taper to #1 Morse taper of Headstock0.23kg
0.5lbs
£48.00
1162DELUXE WW COLLET SET (Inch)17 collets, adapter, drawbar, pot chucks, knockout bar, etc. in wooden case1.36kg
3lbs
£265.00
11638.0 MM COLLET ADAPTER & DRAWBARWW collets vary somewhat depending on manufacturer. This adapter holds those with a .314-.315 body size0.23kg
0.5lbs
£53.00
1164WW COLLET FIXTUREAllows WW collets with .312-.313 body to be held on face of rotary table or mill table.0.45kg
1lbs
£101.00
11658.0 MM COLLET FIXTUREAllows WW collets with .314-.315 body to be held on face of rotary table or mill table.0.45kg
1lbs
£110.50
1170OAK WW COLLET STORAGE BOXA high quality storage box that holds up to 22 WW collets plus collet pot chucks, drawbar, knockout bar and WW collet adapter. Beveled corners, brass hardware, satin lacquer finish.0.45kg
1lbs
£24.00
1171OAK WW COLLET STORAGE BOXA high quality storage box that holds up to 96 WW collets. Beveled corners, brass hardware, oak insert with 96 holes, satin lacquer finish.0.45kg
1lbs
£31.00
117803.3 mm WW COLLET0.02kg
0.05lbs
£38.50
117804.4 mm WW COLLET0.02kg
0.05lbs
£38.50
117805 - 117808 WW COLLETS from size .5mm through .8 mm by .1 mm increments.The Part number is given as 11780 plus the collet size in .1 mm. For example, a .6 mm collet would be P/N 1178060.02kg
0.05lbs
£38.50
117809 - 117814 WW COLLETS from size .9mm through 1.4 mm by .1 mm increments.The part number is given as 11780_ or 1178__ plus the collet size in .1 mm. For example, a 1.1 mm collet would be P/N 117811.0.02kg
0.05lbs
£30.75
117815 - 117880 WW COLLETS from size 1.5 mm through 8.0 mm by .1 mm increments.The part number is given as 1178__ plus the collet size in .1 mm. For example, a 6.4 mm collet would be P/N 117864.0.02kg
0.05lbs
£16.40
1179DELUXE WW COLLET SET (Metric)14 collets, pot chucks, etc. in wooden case. P/N 1161 included in set1.36kg
3lbs
£235.00
1180COMPLETE METRIC WW COLLET SETThe set is contained in a P/N 1171 oak collet box with 96-hole oak insert.1.82kg
4lbs
£898.00
1182BULLNOSE LIVE CENTERSupports tubing or stock with a large end hole when turning between centers. Dual preloaded bearings.0.34kg
0.75lbs
£77.00
1185
1184 (metric)
VERTICAL MILLING TABLEMounts to lathe or mill table to move work up and down. Has 2.25" of vertical travel and 8" long table.1.14kg
2.5lbs
£115.50
1187CHUCK-TO-T-SLOT ADAPTERAllows 3- or 4-jaw chuck to be quickly screwed to mill table.0.03kg
0.06lbs
£7.25
1191LIVE CENTERBall bearings allow center to rotate with part to reduce friction when turning between centers0.11kg
0.25lbs
£38.50
1201ADJUSTABLE LIVE CENTERBall bearing live center adjusts for perfect centering of headstock and tailstock0.23kg
0.5lbs
£62.50
1202ADJUST. TAILSTOCK CHUCK ARBORAllows perfect centering of tailstock chuck in relation to headstock0.23kg
0.5lbs
£43.50
1203ADJUST. TAILSTOCK TOOL HOLDERAllows perfect centering of round tools held in tailstock0.23kg
0.5lbs
£43.50
1206ADJUST. TAILSTOCK 1″ DIE HOLDER w/ 13/16″ bushingAllows perfect centering of 1" or 13/16" threading dies0.23kg
0.5lbs
£58.00
1220TAILSTOCK SPINDLE EXTENDERDesigned for lathes built before July, 1996 to extend reach of tailstock spindle over table. Not needed on newer lathes0.23kg
0.5lbs
£38.50
1230#0 MORSE ARBOR TO 3/4-16 CHUCK THREAD ADAPTERAllows a 3- or 4-jaw chuck to be mounted on the tailstock spindle0.23kg
0.5lbs
£38.50
1270
1280 (metric)
COMPOUND SLIDERedesigned, Replaces P/N 1080. An alternate and more traditional way of turning tapers0.45kg
1lbs
£120.50
1272COMPOUND SLIDE RISER BLOCKRaises compound slide about 1" for use on front side of crosslide with riser blocks in place on lathe0.23kg
0.5lbs
£33.50
1288RISER ROCKER TOOL POSTTaller tool post for use with riser blocks in place on the lathe0.23kg
0.5lbs
£38.50
1289RISER 3/8″ INSERT TOOL POSTTaller tool post for holding 3/8" shank tools with riser blocks in place on the lathe.0.23kg
0.5lbs
£38.50
1290STEADY REST RISERLifts steady rest to match headstock when spacer block is in place. Used mainly by those who leave spacer blocks in place at all times on their lathe.0.11kg
0.25lbs
£48.00
1291SPACER BLOCK KITLifts headstock 1.25" to allow parts up to 6" diameter to be turned. Includes extended riser rocker tool post0.68kg
1.5lbs
£67.50
1292TAILSTOCK RISER BLOCKLifts tailstock 1.25" for turning between centers with headstock riser block in place0.45kg
1lbs
£48.00
1296CUTOFF TOOL HOLDER RISER BLOCKLifts cutoff tool P/N 3002 for use with riser blocks in place. Used with tool upside down on back side of crosslide table.0.23kg
0.5lbs
£48.00
1297MILL HEADSTOCK SPACER BLOCKSame as riser block for lathe, but without tool post. Adds 1.25" of throat distance when milling0.34kg
0.75lbs
£43.50
1300MILL COLUMN SPACER BLOCKRaises column base 2" for greater Z-axis clearance. Includes longer bolts for mounting.0.68kg
1.5lbs
£38.50
2045HEX AND OCTAGON INDEX BLOCK SETFits in mill vise to allow simple indexing of 2, 3, 4, 6 or 8 sides or hole patterns0.91kg
2lbs
£58.00
2049SPINDLE HANDWHEELUsed to rotate the headstock spindle much like the large handwheel on a sewing machine is used0.68kg
1.5lbs
£43.50
2083WW COLLET 1″ BLANKMake your own custom tool holder or collet that is held with the WW adapter and drawbar0.03kg
0.06lbs
£29.00
2085WW COLLET TAILSTOCK ADAPTERUse with P/N 1203) (Allows WW collets to be held in the tailstock0.11kg
0.25lbs
£53.00
20868mm COLLET TAILSTOCK ADAPTERUse with P/N 12030.11kg
0.25lbs
£58.00
20908.0mm COLLET TO 3/4-16 THREADFor mounting Sherline chuck on watchmaker's or jeweler's lathe that takes 8.0mm collets0.23kg
0.5lbs
£38.50
209110mm “D” COLLET TO 3/4-16 THREADFor mounting Sherline chuck on watchmaker's or jeweler's lathe that takes 10mm D collets, not for use on Sherline lathe.0.23kg
0.5lbs
£43.50
20928.0mm COLLET TO 3/8-24 THREADFor mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe that takes 8.0mm collets, not for use on Sherline lathe.0.23kg
0.5lbs
£38.50
209310.0mm COLLET TO 3/8-24 THREADFor mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe that takes 10mm D collets, not for use on Sherline lathe.0.23kg
0.5lbs
£43.50
2094CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to Morse #1Arbor for use on watchmaker or jeweler's lathes to hold round gear cutter, Not for use on Sherline lathe0.23kg
0.5lbs
£58.00
2095CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to 10mm “D” ColletArbor for use on watchmaker's or jeweler's lathes to hold round gear cutter. not for use on Sherline lathe0.23kg
0.5lbs
£58.00
2096CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to 8.0 mm WW ColletArbor for use on watchmaker's or jeweler's lathes to hold round gear cutter, not for use on Sherline lathe0.23kg
0.5lbs
£58.00
2100WW 3/4″ COLLET POT CHUCKCollet pot chucks are like small chucks custom turned to hold a particular part. The part is held in a depression turned in the surface of the pot chuck and does not go all the way through. Includes dowel pin to clamp on while turning to size.0.03kg
0.06lbs
£24.00
2101WW 1″ COLLET POT CHUCKSee 21000.03kg
0.06lbs
£26.00
2102WW 1-1/4″ COLLET POT CHUCKSee 21000.03kg
0.06lbs
£29.00
210310mm 3/4″ COLLET POT CHUCKNot for use on Sherline lathe0.05kg
0.12lbs
£33.50
210410mm 1″ COLLET POT CHUCKNot for use on Sherline lathe0.05kg
0.12lbs
£38.50
210510mm 1-1/4″ COLLET POT CHUCKNot for use on Sherline lathe0.05kg
0.12lbs
£43.50
2106LIVE CENTER-TO-8mm COLLETA live center for watchmaker's or jeweler's lathes.0.11kg
0.25lbs
£72.25
2107LIVE CENTER-TO-10mm COLLETA live center for watchmaker's or jeweler's lathes.0.11kg
0.25lbs
£72.25
2110W.R. SMITH WATCHMAKER’S T-RESTUsed on Sherline lathes to support a hand-held "graver", a traditional watchmaker's tool. Turns Sherline lathe into a first class watch or clock maker's lathe. Designed by famed craftsman W.R. Smith. Graver-making instructions included.0.45kg
1lbs
£192.50
2200RADIUS CUTTING ATTACHMENTFor cutting ball ends, convex and concave radii on ends of parts and even complete balls0.45kg
1lbs
£115.50
2250QUICK CHANGE TOOL POST w/ 3 holdersSaves time when changing tools. Holders included for 1/4" cutter, round boring tool and cutoff tool. Cutting tools not included.1.36kg
3lbs
£250.00
2251QUICK CHANGE TOOL POST RISERBrings quick-change tool post up to proper centerline height when using a riser block under the headstock for cutting larger diameters.0.8kg
1.75lbs
£48.00
2256RIGHT-HAND 35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert)Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel0.11kg
0.25lbs
£43.50
2257LEFT-HAND 35° CARBIDE INSERT TOOL HOLDERIncludes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel0.11kg
0.25lbs
£43.50
2258PAIR OF RIGHT- and LEFT-HAND 35° INSERT TOOL HOLDERSIncludes one 55° insert per holder) (Replacement inserts, P/N 7605) (Save £19.50 by buying both LH and RH tools together0.23kg
0.5lbs
£67.50
225980° INSERT 3/8″ ROUND BORING TOOL, 1/2″ min. hole, carbide insert includedUse w/ P/N 7600 tool post0.07kg
0.15lbs
£58.00
226055° INSERT 3/8″ ROUND BORING TOOL, 3/4″ min. hole, carbide insert includedUse w/ P/N 7600 tool post0.07kg
0.15lbs
£58.00
2261PAIR OF 80° (P/N 2259) AND 55° (P/N 2260) 3/8″ ROUND BORING TOOLS w/ inserts0.11kg
0.25lbs
£91.20
22801/4″ QUICK-CHANGE TOOL BIT HOLDER (Incl. w/ 2250)0.45kg
1lbs
£58.00
22853/8″ QUICK-CHANGE BORING TOOL HOLDER (Incl. w/ 2250)0.45kg
1lbs
£58.00
2290QUICK-CHANGE CUTOFF TOOL HOLDER (Incl. w/ 2250)0.45kg
1lbs
£77.00
2295CARBIDE INSERT HOLDER for QUICK-CHANGE TOOL POST0.45kg
1lbs
£86.50
3001POWER FEED (120V.) (for 240V. see P/N 3011)Single direction motor drives lathe leadscrew .9" per minute to provide smooth final cut on long parts. Not designed for use with thread cutting attachment.2.27kg
5lbs
£86.50
3002CUTOFF TOOL & HOLDERFor cutting off work piece from the raw stock from which it was turned. Often called a "parting tool".0.11kg
0.25lbs
£48.00
3003TWO-POSITION TOOL POSTHolds two 1/4" cutting tools for quicker tool changes0.11kg
0.25lbs
£15.50
3004KNURLING TOOL HOLDERMakes knurled finishes. Includes one set of spiral knurls. Other sizes and patterns available0.11kg
0.25lbs
£72.25
30051/4″ SQ. HIGH SPEED STEEL TOOL BLANKSharpen yourself on a bench grinder for standard or custom-shaped tools0.03kg
0.06lbs
£2.90
3006CARBIDE TOOL SET (3 PC) (LH, RH, 60° THREADING)Carbide tips are brazed to 1/4" tool shanks. For cutting hard materials0.17kg
0.38lbs
£19.25
3007HIGH SPEED STEEL TOOL SET (3 PC) (LH, RH, BORING)Pre-sharpened to save you time. For cutting most materials0.05kg
0.12lbs
£24.00
3008TWO-POSITION TOOL POST, 5/16″ – 3/8″Holds 5/16" tool on one side, 3/8" on other side. Allows use of tools other than 1/4"0.11kg
0.25lbs
£24.00
3009CUTTING TOOL HEIGHT GAUGEUsed to assure tool tip on resharpened tools is set to proper centerline height. Works with both regular or riser toolpost0.11kg
0.25lbs
£19.25
3011POWER FEED (240V)See P/N 30012.27kg
5lbs
£96.50
3012HOLD-DOWN SETSimple strap clamp set for clamping parts to table for milling. Includes 2 clamps, T-nuts and assorted length bolts0.17kg
0.38lbs
£24.00
3013STEP BLOCK HOLD-DOWN SETThis is a smaller version of the sets used on most full-size mills. Quicker to use than 3012 and holds larger parts. Stepped blocks interlock to adjust height quickly. Spare block included to be cut to custom sizes0.45kg
1lbs
£38.50
3015TOGGLE SWITCH DUST SEALUse to keep fine dust out of speed contorl on/off switch when cutting brass or wood0.03kg
0.06lbs
£8.25
3016CUTOFF TOOL REAR MOUNTING BLOCKAllows 3002 cutoff tool to be mounted on "back" side of crosslide where it is out of the way and can be left in place for easy parting off. Cutoff blade mounts upside down for use in this position0.05kg
0.12lbs
£14.50
3017CROSSLIDE ACCESSORY PLATEStrengthens and protects lathe table when used for milling with vertical milling column. Not for use during lathe operations as tool post height will be incorrect.0.45kg
1lbs
£38.50
3018REAR MOUNT CUTOFF TOOL AND HOLDER0.11kg
0.25lbs
£48.00
3020SHERLINE “T” DRIVER5/32" hex driver with T-handle adjusts majority of 10-32 screws on Sherline tool. Easy to find on your bench.0.05kg
0.12lbs
£5.80
3021CENTER DRILL SET (3 PC., #1, #2, #3 double-ended)Center drills don't wander off center when starting holes. 60° tip makes proper hole to match dead or live center tips for turning between centers0.03kg
0.06lbs
£15.50
3035SPUR DRIVERA quick way to drive wood parts when turning between centers.0.11kg
0.25lbs
£24.00
3038WOOD TOOL REST (3″ & 5″ REST)Supports hand-held wood cutting tools for wood turning0.34kg
0.75lbs
£53.00
3047EXTENDED WOOD TOOL REST SET (For use w/ 1291)Like 3038 only with longer shafts to match height of headstock with riser block in place0.11kg
0.25lbs
£58.00
3050
3053 (metric)
VERTICAL MILLING COLUMNConverts your lathe into a 3-axis mill in less than 30 seconds.3.64kg
8lbs
£144.50
3050-CNC
3053-CNC (metric)
VERTICAL MILLING COLUMN, CNC READYConverts lathe into a 3-axis mill. Stepper motor mount is ready to accept NEMA 23 frame size stepper motor for CNC control4.09kg
9lbs
£241.25
3052FLY CUTTERFor quickly milling large, flat surfaces.0.23kg
0.5lbs
£33.75
3054BORING HEADFor enlarging holes to a precise inside diameter, uses 3/8" round boring tools0.23kg
0.5lbs
£67.50
3055MORSE #1 BLANKTurn on lathe and/or mill slots to make your own custom fly cutter, slitting saw holder or special tool holder0.23kg
0.5lbs
£15.50
3056T-NUTS, 10/32 (Set of 10)0.03kg
0.06lbs
£7.75
3057ROCKER TOOL POSTRocking insert with two screws allows adjustment of tool tip height for accurate turning. Eliminates shimming. Included on Model 4400/4410 lathes0.11kg
0.25lbs
£29.00
30584-JAW HOLD DOWN SETTwo angle clamps with T-nuts to clamp 4-jaw vise to any position on mill table. Included with 3551 mill vise0.05kg
0.12lbs
£5.75
3060
3090 (metric)
MILLING COLLET SET (3 PC)(1/8", 3/16", 1/4") Milling collets have a #1 Morse taper and are pulled into the headstock with a drawbolt. They do not have a through hole like WW collets. They are used to hold specific size end mills or cutters.0.05kg
0.12lbs
£43.50
3061BORING TOOL—Max. Depth .600, Min. Hole 1/4″)Use w/ P/N 3054 boring head0.05kg
0.12lbs
£14.50
3063BORING TOOL—Max. Depth 1″, Min. Hole 5/16″Use with P/N 3054 boring head0.05kg
0.12lbs
£14.50
3064BORING TOOL—Max. Depth 1.5″, Min. Hole 5/16″Use w/ 3054 boring head0.05kg
0.12lbs
£17.25
3065SLITTING SAW HOLDERHolds small, round sawblades for cutting thin slots0.11kg
0.25lbs
£38.50
30702.5″ Dia. x 1-5/16″ STEEL BLANK (Chuck body) w/ 3/4-16 threadA billet of 12L14 steel threaded for the Sherline spindle, ready to turn it into whatever tool or part you need. A blank canvas for machinists.0.91kg
2lbs
£24.00
3074Tool holder for 1/4″ or 3/8″ Jacobs drill chucks3/4-16 female thread to 3/8-24 male thread adapter replaces #1 Morse arbor to allow drill chucks to be threaded on to outside thread of spindle to speed up tool changes on CNC machines. No variation in drill length when changing tools back and forth. Cannot be used with 5/32" Jacobs chucks as they do not have a threaded back.0.23kg
0.5lbs
£33.50
30755/16″ END MILL HOLDER0.23kg
0.5lbs
£29.00
30766.0mm END MILL HOLDER0.23kg
0.5lbs
£29.00
30778.0mm END MILL HOLDER0.23kg
0.5lbs
£29.00
307810.0MM END MILL HOLDERMost common size metric tool holder0.23kg
0.5lbs
£29.00
30793/8″ END MILL HOLDERMost common size inch tool holder. 3/8" end mills are available from many sources and are, therefore, the least expensive and available in the largest selection.0.23kg
0.5lbs
£29.00
3080END MILL SET (1/4″ SHK) (1/8″, 3/16″, 1/4″)0.03kg
0.06lbs
£29.00
30873/32″ MILL COLLET0.03kg
0.06lbs
£19.25
30895/32″ MILL COLLET0.03kg
0.06lbs
£19.25
30903-PC. METRIC MILL COLLET SET w/ 3.0, 4.0 and 6.0 mm colletsSee P/N 3060 for inch version set and description.0.07kg
0.15lbs
£43.50
30917/32″ MILL COLLET0.03kg
0.06lbs
£19.25
30923.0MM MILL COLLET0.03kg
0.06lbs
£15.50
30934.0MM MILL COLLET0.03kg
0.06lbs
£15.50
30946.0MM MILL COLLET0.03kg
0.06lbs
£15.50
30951/8″ MILL COLLET0.03kg
0.06lbs
£15.50
30963/16″ MILL COLLET0.03kg
0.06lbs
£15.50
30971/4″ MILL COLLET0.03kg
0.06lbs
£15.50
3098MILL COLLET (Special Order .125 to .312)Allow 3 weeks delivery0.03kg
0.06lbs
£29.00
3100THREAD-CUTTING ATTACHMENTBeing able to cut threads on your lathe frees you from the expense of purchasing a lot of expensive taps and dies for non-standard size threads. Cut just about any thread, inch or metric, using this set of change gears. Hand crank wheel included1.36kg
3lbs
£120.50
3200INDEXING ATTACHMENTIndexes in 5° increments, uses rack gear to turn rotation into measurable linear movement for divisions other than 5° multiples. Includes base and tailstock.3.64kg
8lbs
£192.50
3217GEAR TOOTH CUTTER HOLDER & HSS BLANKGrind gear shape into tool blank and use on mill in conjunction with indexing attachment or rotary table to cut your own gears.0.23kg
0.5lbs
£33.75
3230MILL ARBOR-7/8″ DIA. (Short)Holds round mill cutters0.23kg
0.5lbs
£48.00
3231MILL ARBOR-7/8″ DIA. (Long)Holds round mill cutters0.23kg
0.5lbs
£48.00
3235MILL ARBOR-1″ DIA. (Short)Holds round mill cutters0.23kg
0.5lbs
£48.00
3236MILL ARBOR-1″ DIA. (Long)Holds round mill cutters0.23kg
0.5lbs
£48.00
3306STD. HEADSTOCK, DC MOTOR AND SPEED CONTROLComplete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 2800 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 1400 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.4.55kg
10lbs
£288.00
330710,000 RPM HEADSTOCK, DC MOTOR AND SPEED CONTROLComplete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 10,000 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 2200 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.4.55kg
10lbs
£365.00
3400
3410 (metric)
OVERSIZE HANDWHEEL2.5" diameter for easier cranking0.05kg
0.12lbs
£14.50
3420
3430 (metric)
2″ ADJUSTABLE ZERO HANDWHEELMill Y-axis or lathe crosslide0.11kg
0.25lbs
£33.75
3440
3450 (metric)
2.5″ ADJUSTABLE ZERO HANDWHEELMill Y-axis or lathe leadscrew0.11kg
0.25lbs
£38.50
3460
3465 (metric)
2.5″ ADJUSTABLE ZERO HANDWHEELW/Thrust & Bearing Set for Mill Z-axis0.11kg
0.25lbs
£43.50
3480
3485 (metric)
VERTICAL MILLING COLUMN W/ADJ. HANDWHEELTurns lathe into a mill in less than 30 seconds. Normally used with 4500 or 4400 lathes to match adj. Zero handwheels.3.64kg
8lbs
£163.75
3500ROTARY COLUMN ATTACHMENTAllows mill column to be swung up to 90° to either side for angled drilling.0.8kg
1.75lbs
£77.00
3551MILLING VISEHolds work for milling. Looks similar to a drill press vise, but jaw pulls down and in to keep parts from lifting during milling. Precise jaws and body can be squared up with table.1.14kg
2.5lbs
£72.25
355990° ANGLE PLATEMounts parts 90° to table for milling1.82kg
4lbs
£96.00
3560MILL TOOLING PLATEProtects mill table, pre-drilled hole pattern makes it easy to clamp parts, mount mill vise or rotary table to mill.1.14kg
2.5lbs
£58.00
3570ROTATING MILL VISE BASEHolds mill vise while allowing it to be rotated 360° using laser engraved scale for angle reference0.45kg
1lbs
£96.25
3575ROTATING MILL VISE BASE AND MILL VISE (P/N 3551)Save by buying vise and base at same time1.14kg
2.5lbs
£159.00
3580
3585 (metric)
MULTI-DIRECTION DELUXE VERTICAL MILLING COLUMNTurns your lathe into an 8-direction mill in 30 seconds5.91kg
13lbs
£361.00
37004″ PRECISION ROTARY TABLE72:1 worm gear divides a circle into 3600 parts without interpolation. Used for indexing radial hole patterns or milling radii or indexed flats. Used on 3701 or 3750 to index for cutting gear teeth. A mill with a rotary table is an extremely potent combination, make virtually any part possible, with size being the only limitation3.64kg
8lbs
£260.00
3700-CNC 4″ PRECISION ROTARY TABLE, CNC-READYIncludes stepper motor mount ready for application of your own stepper motor and CNC controls. Handwheel also included5kg
11lbs
£328.50
3701RIGHT ANGLE ATTACHMENT (For use with P/N 3700)Mounts rotary table perpendicular to mill table1.36kg
3lbs
£72.25
3702RIGHT ANGLE ADJUSTABLE TAILSTOCKFor use with P/N 3700. Aligns with center of rotary table when mounted on 3701. Supports arbor shaft used to hold gear blanks when cutting teeth.0.91kg
2lbs
£72.25
371012 mm to 3/8-16 ADAPTERAllows Chuck with 12 mm thread to be mounted to Sherline rotary table P/N 37000.11kg
0.25lbs
£14.50
371114 mm to 3/8-16 ADAPTERAllows Chuck with 14mm thread to be mounted to Sherline rotary table P/N 37000.11kg
0.25lbs
£14.50
3750TILTING ANGLE TABLEMount part, mill vise, chucks or rotary table to mill any angle from 0° to 90°. In 90° position, holds rotary table at same height as 3701, eliminating the need for that part1.14kg
2.5lbs
£106.00
4017U
4117U (metric)
MILL SADDLE LOCKING LEVER UPGRADEAllows Z-axis leadscrew to be locked with a lever on the leadscrew instead of tightening a screw with a hex wrench. Standard on all mills after 19980.23kg
0.5lbs
£24.00
4017Z
4117Z (metric)
CNC MILL ANTIBACKLASH ADJUSTER UPGRADEAllows the Z-axis locking lever to be positioned in partially locked positions to reduce backlash to as little as .001". Standard on CNC mills after 2/04. Can be installed as an option on any Sherline mill.0.23kg
0.5lbs
£33.50
415015″ LATHE VINYL COVERProtect your 4000-series lathe from dust and grit0.11kg
0.25lbs
£9.75
415124″ LATHE VINYL DUST COVERProtect your 4400-series lathe from dust and grit0.11kg
0.25lbs
£11.50
433510,000 RPM PULLEY CONVERSIONHigh speed position allows motor to turn spindle at a maximum of 10,000 RPM. Second belt position provides more torque and a maximum of 2200 RPM. New 2-piece standoff replaces standard motor standoffs. Installs in about 10 minutes.0.45kg
1lbs
£77.00
4360CHIP GUARDClear shield contains flying chips. Pivots out of the way when not needed. Not a substitute for safety glasses0.23kg
0.5lbs
£14.50
4417Z
4417ZM (metric)
CNC LATHE BACKLASH ADJUSTERInstalls on leadscrew to provide a way to reduce backlash during CNC operations. Similar to the 4017Z lock developed for the mill, it uses a lever which is tightened against the saddle nut to control backlash. A positioning arm holds the locking lever in any desired position. Installed on all CNC-ready lathes as of 5/04. Can be installed as an option on any Sherline lathe.0.23kg
0.5lbs
£33.50
5011U
5111U (metric)
MILL X and Y AXIS STAR GEAR BACKLASH UPGRADEInstalls on mills made after 1997 when the pointer style backlash lock was replaced with the star gear type lock and up until July, 2004 when this change was incorporated into regular production. Includes new star gears and leadscrew nuts with finer teeth for mill X and Y axis plus new button head screws to hold the locking gear.0.05kg
0.1lbs
£9.75
5150MILL VINYL COVERProtects your 2000-series mill from dust and grit0.11kg
0.25lbs
£11.50
5151MILL VINYL COVERProtects your 2000-series mill from dust and grit0.11kg
0.25lbs
£14.50
5200
5210 (metric)
XY BASE (10″) (Inch)Add a 3050 vertical milling column and the motor/speed control from your lathe and you have a model 5000 mill7.73kg
17lbs
£250.00
5200-CNC
5210-CNC (metric)
XY BASE (10″) CNC READY (Inch) w/ 2 stepper motor mountsStepper motors and CNC controls not included.9.09kg
20lbs
£421.00
5201
5211 (metric)
XYZ BASE (10″) (Inch)Add the motor/speed control from your lathe and you have a model 5000 mill11.82kg
26lbs
£393.50
5201-CNC
5211-CNC (metric)
XYZ BASE (10″) CNC READY (Inch) w/ 3 stepper motor mountsStepper motors and CNC controls not included.12.27kg
27lbs
£678.00
5220
5225 (metric)
XY BASE (10″) W/ ADJUST. HANDWHEELSAdd a vertical milling column with adjustable handwheels and the motor/speed control from your lathe and you have a complete model 5500/5510 mill8.64kg
19lbs
£322.00
5230
5235 (metric)
XYZ BASE (10″ W/ ADJUST. HANDWHEELSAdd the motor/speed control from your lathe and you have a complete model 5500/5510 mill11.82kg
26lbs
£446.00
5300HOME MACHINIST’S HANDBOOK by Doug Briney275 pages, B/W, uses Sherline tools in all the setup examples, project plans included0.91kg
2lbs
£24.00
5301TABLETOP MACHINING by Joe MartinThe ultimate miniature machining book by Sherline's owner. All color, 8-1/2 x 11, 400+ photos, 200+ illustrations. Third printing, 11/01 includes 8 more pages and several new photos.1.36kg
3lbs
£38.50
5325SHERLINE TOOLS & ACCESSORIES CATALOG, 6th Edition48-page color catalog shows tools and accessories plus tells briefly how each is used. Current price lists enclosed.0.23kg
0.5lbs
£2.00
5326SHERLINE ASSEMBLY AND INSTRUCTION GUIDE, 4th Edition44-page color instruction book included with new machines. A good basic course in machining0.23kg
0.5lbs
£2.00
5327SHERLINE SHOP GUIDE144 pages, B/W, 8.5 x 11" perfect bound book incorporates illustrated instructions from all of Sherline's major accessories into one volume.1.36kg
3lbs
£9.75
5328STEAM ENGINE VIDEO by Rudy KouhouptVHS, 3 Hrs., includes materials list and printed plans for a steam engine. Video takes you through every setup from start to finish.0.91kg
2lbs
£67.00
5329SHOP SECRETS—USING MEASURING TOOLS by Mike RehmusVHS, 2 hrs., tells you how each measuring tool used in machining is used and cared for. Very professionally produced. Includes promo for NAMES show too0.45kg
1lbs
£38.50
5330SAFETY GLASSESA MUST in every shop. Get them from us or get them from someone else, but don't cut metal without them! These are good quality and comfortable.0.11kg
0.25lbs
£7.25
5401
5411 (metric)
DELUXE XY BASE (Inch) w/ 12″ Base and Adjustable HandwheelsAdd a 3480 vertical milling column and the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.8.64kg
19lbs
£365.00
5401-CNC
5411-CNC (metric)
DELUXE XY BASE CNC READY w/ 2 stepper motor mountsStepper motors and CNC controls not included.9.55kg
21lbs
£503.00
5420
5430 (metric)
DELUXE XYZ BASE (Inch) w/ 12″ Base and Adjustable HandwheelsAdd the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.12.27kg
27lbs
£476.00
5420-CNC
5430-CNC (metric)
DELUXE XYZ BASE CNC READY (Inch) w/ 3 stepper motor mountsStepper motors and CNC controls not included.12.73kg
28lbs
£719.00
5600
5610 (metric)
Model 2000 8-DIRECTION MILL XY BASEAdd a multi-direction vertical milling column and the motor/speed control from your lathe and you have a complete model 2000 mill.10kg
22lbs
£384.00
5625
5630 (metric)
Model 2000 8-DIRECTION MILL XYZ BASEAdd the motor/speed control from your lathe and you have a complete model 2000 mill.15.45kg
34lbs
£744.00
5650
5660 (metric)
8-DIRECTION UPGRADE for all existing SHERLINE MILLSA multi-direction milling column and an offset base brings your existing mill up to the capabilities of a model 2000 mill.4.09kg
9lbs
£255.00
5680
5685 (metric)
8-DIRECTION UPGRADE for LATHE VERTICAL MILLING COLUMNTurns your lathe/vertical milling column combination into an 8-direction mill.4.09kg
9lbs
£255.00
60791/4″ END MILL HOLDERHolds end mills in 3080 set0.23kg
0.5lbs
£29.00
60803/16″ END MILL HOLDER0.23kg
0.5lbs
£29.00
60811/8″ END MILL HOLDER0.23kg
0.5lbs
£29.00
6100HORIZONTAL MILLING CONVERSION5kg
11lbs
£125.00
6101COLUMN CONVERSIONTo optimize the horizontal conversion, P/N 6100, the mill column should be reworked to allow for the best set up. Contact SHERLINE for information.3.64kg
8lbs
£CALL
6700
6710 (metric)
CNC UPGRADE KIT, 5000 OR 5400 MILLReplaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.1.14kg
2.5lbs
£240.00
6705
6715 (metric)
CNC UPGRADE KIT, 2000 MILLReplaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.1.14kg
2.5lbs
£257.00
67127STEPPER MOTOR2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall torque, pre-wired with plug for use with Sherline rotary or linear controller, flats pre-machined for Sherline coupler and handwheel set screws.0.45kg
1lbs
£72.25
67130STEPPER MOTOR2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall torque, 6-wire plug-in harness with raw leads for use on applications that do not have the Sherline 5-pin connector plug, flats pre-machined for Sherline coupler and handwheel set screws.0.45kg
1lbs
£62.50
6720
6725 (metric)
CNC UPGRADE KIT, 4000 or 4500 LATHEReplaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.0.91kg
2lbs
£205.50
6730
6735 (metric)
CNC UPGRADE KIT, 4400 LATHEReplaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.0.91kg
2lbs
£215.50
6740
6745 (metric)
CNC UPGRADE KIT, 5000 and 5400 Series Mills, Z-axis only0.68kg
1.5lbs
£103.00
6750
6755 (metric)
CNC UPGRADE KIT, 2000 Series Mills, Z-axis only0.68kg
1.5lbs
£103.00
6760
6765 (metric)
CNC UPGRADE KIT, mill X axis or lathe Crosslide only (all models)0.45kg
1lbs
£74.00
6770
6775 (metric)
CNC UPGRADE KIT, mill Y axis only (all mill models)0.45kg
1lbs
£74.00
6780
6785 (metric)
CNC UPGRADE KIT, leadscrew axis only, 4000/4500-series lathes0.45kg
1lbs
£134.00
6790
6795 (metric)
CNC UPGRADE KIT, leadscrew axis only, 4400-series lathes0.45kg
1lbs
£144.00
7505SET OF MACHINIST’S PARALLELSSets of two parallel bars in five different sizes sized for miniature machine tools. Used to support work a known distance above and parallel to the table.0.11kg
0.25lbs
£29.00
7550Super-Lube multi-purpose synthetic grease with Syncolon® (PTFE), 3 oz tubeTeflon-based grease that we use at the factory on all new machines. Clear, non-staining, heat resistant.0.11kg
0.25lbs
£4.75
7550Super-Lube dri-film spray lubricant with Syncolon® (PTFE), 11 oz aerosol canTeflon-based film that sprays on. Once propellant dries, it leaves a thin coat of dry lubricant that won't attract chips.0.45kg
1lbs
£7.75
76003/8″ INSERT HOLDER TOOL POSTHas side slot to hold 3/8" shank cutting tool holders plus a 3/8" round hole to hold round boring bars.0.11kg
0.25lbs
£19.25
761055° NEGATIVE RAKE INSERT HOLDER w/ insertHolds carbide tips for cutting hard materials like stainless steel. 5° angle provides negative clearance for the cutter, which is supported all the way down to the table for rigidity.0.23kg
0.5lbs
£58.00
7612REPLACEMENT 4-SIDED CARBIDE INSERT TOOL (for 7610)0.03kg
0.06lbs
£12.50
7620SINGLE FLUTE INSERT FLY CUTTERCarbide insert cuts hard materials. Also is a good compromise between a fly cutter and an end mill, because it will cut a 1-1/8" wide path while still being able to cut right up to a shoulder.0.23kg
0.5lbs
£58.00
7622REPLACEMENT 2-SIDED CARBIDE TIP (for 7620)0.03kg
0.06lbs
£12.50
8100
8160 (metric)
3-AXIS DIGITAL READOUT w/ RPM GAGE FOR MILL (inch)Reads table position to .0005", electronic compensation for backlash1.36kg
3lbs
£361.00
8200
8260 (metric)
2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE (inch)Reads table position to .0005", electronic compensation for backlash1.36kg
3lbs
£313.00
8210
8215 (metric)
3-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE and VERTICAL MILLING COLUMN (Inch)Reads table position to .0005", electronic compensation for backlash1.36kg
3lbs
£370.00
8220
8225 (metric)
2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE without READOUT BOXFor those who already have a Mill DRO package. (Inch) Reads table position to .0005", electronic compensation for backlash.0.91kg
2lbs
£159.00
8240
8245 (metric)
Z-AXIS VERTICAL MILLING COLUMN DIGITAL READOUT HANDWHEEL PACKAGE (Inch)Adds third readout for those who bought 2-axis DRO and later add a vertical milling column.0.23kg
0.5lbs
£62.50
8700CNC ROTARY INDEXER w/ CONTROLLERCNC ROTARY INDEXER w/ CONTROLLER, STEPPER MOTOR, MOUNT, POWER SUPPLY, CABLES, 4″ ROTARY TABLE AND HOLD-DOWNS (Inch)7.73kg
17lbs
£696.00
8701CNC ROTARY TABLE RISER PLATEOn the 3700-CNC and 8700 CNC rotary tables, the bottom of the stepper motor mount extends slightly below the bottom surface of the table. On Sherline mills, the mount overhangs the side of the table so this is not a problem. On larger mills or flat table applications a riser plate is needed so that the stepper motor clears the table surface.0.91kg
2lbs
£24.00
8730CNC ROTARY TABLE WITH STEPPER MOTORStepper motor plugs into 4th axis cable of 8760 driver box or Sherline 8540 or 8020 CNC system to act as 4th axis. Includes prewired plug.4.55kg
10lbs
£380.00
8760CNC 4-AXIS DRIVER BOXIncludes 4 cables for X, Y, Z and A (Rotary) axes, power supply and parallel cable for attachment to computer's printer port. Linux OS and EMC 4-axis softare also included on two CD's. Buy or upgrade a CNC-ready Sherline machine, buy the needed P/N 67127 stepper motors, plug in and attach to your computer with Linux/EMC installed and you have the duplicate of a complete Sherline CNC system. NOTE: one hour of free technical support provided with Sherline CNC system is NOT provided when driver box is purchased separately.3.18kg
7lbs
£576.00
8765Upgrade any CNC-ready Sherline lathe to CNC (Computer not included.)Save compared to complete systems with computer. Includes 2 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does NOT include software installation and technical support.4.09kg
9lbs
£701.00
8770Upgrade any CNC-ready Sherline lathe to CNC (Computer not included.)Save compared to complete systems with computer. Includes 2 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does NOT include software installation and technical support.4.55kg
10lbs
£773.00
8800CNC LINEAR CONTROLLER w/ STEPPER MOTOR (Inch)Stepper motor bolts onto Sherline CNC-ready stepper motor mounts. Controller drives stepper motor to move any axis on lathe or mill. From .0005" to 9.9995". Will work on any lathe or mill axis that already has a stepper motor mount installed. Includes power supply and cable. Can be daisy chained with other Sherline linear or rotary controllers.2.27kg
5lbs
£432.00
8850CNC MILL OR LATHE POWER FEEDReplaces handwheel on X- or Y-axis of mill or lathe crosslide with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to allow movement from .0005" to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline controllers2.73kg
6lbs
£480.00
8860CNC MILL POWER FEEDReplaces handwheel on Z-axis of mill with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move Z-axis in programmable .0005" increments up to full length of travel. Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.3.18kg
7lbs
£490.00
8865CNC MILL POWER FEEDSee description for 8860.3.18kg
7lbs
£490.00
8870CNC LATHE LEADSCREW POWER FEEDReplaces handwheel on long leadscrew of lathe with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move the saddle from .0005 to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.3.18kg
7lbs
£499.00
8880CNC LATHE LEADSCREW POWER FEEDSee description for 8870 above.3.18kg
7lbs
£509.00

SHERLINE CHUCKS

Part Number Part Weight Cost
10100JT 5/32″ Jacobs drill chuck w/ #1 Morse arbor (headstock), drawbolt and key0.23kg
0.5lbs
£67.50
1012Sensitive drilling attachmentSee Accessories section following chuck section.0.91kg
2lbs
£106.00
10150JT 5/32″ Jacobs drill chuck w/ #0 Morse (tailstock) arbor and keySherline Lathe0.23kg
0.5lbs
£67.50
10304-Jaw Chuck (3.125″ O.D.)0.91kg
2lbs
£130.00
103114 x 1 mm 3-jaw chuck (2.5″ O.D.)1/2-20 threads for use on old Sears 6″ lathe0.91kg
2lbs
£115.50
103514 x 1 mm 4-jaw chuck (2.5″ O.D.)1/2-20 threads for use on old Sears 6″ lathe0.91kg
2lbs
£115.50
10403-Jaw Chuck (3.125″ O.D.)0.91kg
2lbs
£125.00
10413-Jaw Chuck (2.5″ O.D.)0.91kg
2lbs
£96.00
10444-Jaw Chuck (2.5″ O.D.)0.91kg
2lbs
£106.00
106812 x 1 mm 3-jaw chuck (2.5″ O.D.) w/ reversible jaws12 x1 mm threads for use on Unimat SL 10000.91kg
2lbs
£115.50
10693/8″ Jacobs Tailstock Drill Chuck w/ #0 and #1 Morse arbors, drawbolt and key0.68kg
1.5lbs
£62.50
10701/2-20 3-Jaw (2.5″ O.D.)14 x 1 mm threads for use on Unimat 3 or Cowells lathes0.91kg
2lbs
£115.50
107112 x 1 mm 4-jaw chuck (2.5″ O.D.)12 x1 mm threads for use on Unimat SL 10000.91kg
2lbs
£115.50
10721/4″ Jacobs tailstock drill chuck w/ #0 and #1 Morse arbors, drawbolt and key0.23kg
0.5lbs
£53.00
107312-20 4-Jaw Chuck (2.5″ O.D.)14 x 1 mm threads for use on Unimat 3 or Cowells lathes0.91kg
2lbs
£115.50
1075Self-centering 4-Jaw Chuck (2.5″ O.D.)0.91kg
2lbs
£125.00
1076Self-centering 4-Jaw Chuck (3.125″ O.D.)0.91kg
2lbs
£158.50
30721/4″ Jacobs Drill Chuck w/ #1 Morse arbor, drawbolt and key#0 Morse arbor not incl. See P/N 1072 if you need both arbors0.23kg
0.5lbs
£48.00
30733/8″ Jacobs Drill Chuck w/ #1 Morse arbor, drawbolt and key#0 Morse arbor not incl. See P/N 1069 if you need both arbors0.34kg
0.75lbs
£58.00

COMPLETE MACHINE SHOP PACKAGES

Part Number Part Weight Cost
6000
6010 (metric)
Ultimate Machine Shop Package with 5400 MillAll the basic tools of a good machine shop in one package.42.27kg
93lbs
£2,330.00
6000-CNC
6010-CNC (metric)
6000/6010 Ultimate Machine Shop package with CNC stepper motor mounts6000/6010 Ultimate Machine Shop package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls (purchased separately from Sherline or aftermarket supplier)45kg
99lbs
£2,907.00
6000-DRO
6010-DRO (metric)
6000/6010 Ultimate Machine Shop package with digital readouts factory installed on both lathe and mill45kg
99lbs
£2,945.00
6200
6210 (metric)
Ultimate Machine Shop Package with 2000 MillUltimate Machine Shop Package with 2000 Mill. (6000 Package shown) This package is the same as the 6000/6010 package listed above except the Model 2000/2010 8-direction mill is substituted for the Model 5400/5410 mill.44.55kg
98lbs
£2,590.00
6200-CNC
6210-CNC (metric)
6200/6210 Ultimate Machine Shop package with CNC stepper motor mounts6200/6210 Ultimate Machine Shop package with CNC stepper motor mounts factory installed ready for the application of stepper motors and CNC controls (purchased separately from Sherline or an aftermarket supplier)47.27kg
104lbs
£3,185.00
6200-DRO
6210-DRO (metric)
6200/6210 Ultimate Machine Shop package with digital readouts factory installed on both lathe and mill47.27kg
104lbs
£3,205.00

TABLETOP MACHINING BOOK

Part Number Part Weight Cost
5301Joe Martin’s Tabletop Machining bookTake £9.50 off when you order Joe Martin’s Tabletop Machining book with the purchase of any of the above four lathe, mill or machine shop packages.1.36kg
3lbs
£38.50